Looking for advice on effectively cleaning a fuel tank? After draining 20 gallons of fuel, replacing lines and filters, and experiencing a brief improvement in performance, the issue resurfaced. Upon further inspection, rust particles were discovered in the fuel system. This common problem can be tackled with the right chemicals, cleaning process, and possibly a protective coating post-cleaning. Any guidance on how to proceed would be greatly valued. Thank you, carpentervin.
If you're looking for a cost-effective and efficient way to clean a tank, try this method: attach the tank to a concrete mixer, mix in water and broken glass, and run until clean. For a more permanent solution, consider adding a larger filter head directly to the tank with a bigger hose to prevent clogs and remove large debris before it causes issues in the system. Check out helpful videos on YouTube for step-by-step instructions on this tank-cleaning technique.
Delmer recommended a unique method for cleaning a fuel tank: attaching it to a concrete mixer, adding water and broken glass, and running it until clean. To prevent clogging, he suggested adding a larger filter head connected directly to the tank with a bigger hose. However, it may be challenging to do this when the fuel tank is part of the frame. One suggestion after cleaning the tank is to drop strong magnets into the bottom to attract loose particles. It is also important to keep the tank full to prevent rust, as diesel fuel does not offer rust protection. Despite the possible difficulty of sealing a rusty tank due to the machine's long and narrow design, it is crucial to try and prevent further rusting. Additionally, it was mentioned that there may be a small tank built into the engine cradle. Keeping these factors in mind can help maintain the fuel tank's condition and prevent future issues.
Looking for rare earth magnets on eBay? Drop them into your fuel tank to improve fuel efficiency and engine performance. This trick works wonders on older cars and motorcycles. Give it a try!
When cleaning my 644 tank, I discovered 1/4 inch of fuel mixed with water and debris at the bottom. To thoroughly remove it, I improvised a wet-dry vacuum system. I lowered a lamp into the tank for better visibility and bonded my vacuum hose to a rigid rod for precision. While there wasn't much rust present, this technique helped me achieve a thorough cleaning of the tank.
Answer: - Rust particles in a fuel tank are a common problem due to moisture buildup within the tank, which can cause the metal to corrode over time.
Answer: - Commonly recommended chemicals for cleaning a fuel tank with rust particles include rust dissolvers, fuel tank cleaners, and rust inhibitors.
Answer: - The recommended cleaning process for a fuel tank with rust particles typically involves draining the fuel, removing any remaining debris, applying a rust dissolver, agitating the tank, rinsing it thoroughly, and allowing it to dry completely.
Answer: - Applying a protective coating to the fuel tank post-cleaning can help prevent future rust issues by creating a barrier between the metal and moisture, thus inhibiting corrosion.
Join hundreds of satisfied customers who have transformed their maintenance processes.
Sign up today and start optimizing your workflow.