I am in search of a pre-owned skid steer to complement my excavator. I came across a used Bobcat 763 at a good price, but it requires rear axle seals and some other minor repairs. I would like to know the level of difficulty in replacing these seals and if there are any additional potential issues to be aware of when purchasing a used skid steer.
If the axle bearings are in good condition, you can safely remove the hub to replace the seal. Bobcat offers a specialized seal driver for ensuring the seal sits at the correct depth. However, often faulty seals indicate worn or loose bearings. Overall, the task of replacing the bearings and races is relatively straightforward. Simply remove the inner bolt and sprocket from inside the chaincase, then pull out the axle for maintenance.
In order to replace a seal on the axle, first check the condition of the bearings. If they are still in good shape, the hub can be removed, the seal pried out, and a new seal installed. Bobcat offers a special seal driver to ensure the seal is set at the correct depth. However, it is important to note that often bad seals are an indication of worn out or loose bearings. Overall, the repair job is not overly difficult. By removing the inner bolt, sprocket, and axle from the chaincase, the bearings and races can be replaced. I have a tractor with a loader and I'm exploring alternatives to purchasing a skid steer for over 30k. I am looking for something under 15k that can be used with an excavator. The equipment I am considering is priced at 7500. I am unsure if this will be a simple fix or if it will turn into a frustrating task.
A Carolina entrepreneur expressed their dilemma about the cost of a new skid steer for their tractor with a loader. They are looking for a cost-effective solution under $15k to use with their excavator, as they don't want to spend over $30k. They are considering a $7500 option but are unsure if it will be worth it in the long run. If they have to pay a dealer to reseal the rear axles, it may not be a wise investment. Having worked at a dealership, it is common to see repair bills exceed the value of the machine, but some still choose to proceed.
As crewchief888 mentioned, if you're considering hiring a professional to reseal the rear axles, it may not be cost-effective for you. In my humble opinion, based on my experience working at a dealership, I've seen repair bills exceed the value of the machine itself. However, some individuals still opt to go through with it. In this case, I was considering DIY-ing the task and watching YouTube tutorials for guidance.
A startup in North Carolina mentioned that they were considering working on a project at home while watching YouTube tutorials. Ultimately, the decision on whether it's worth the investment of time, effort, and parts cost is up to you.
Answer: Replacing rear axle seals on a Bobcat 763 skid steer can vary in difficulty depending on your mechanical experience. It may require proper tools and knowledge of the skid steer's components.
Answer: When buying a used skid steer like the Bobcat 763, it's important to inspect for overall condition, maintenance history, potential leaks, wear on components, and any needed repairs or replacements.
Answer: When replacing rear axle seals on a Bobcat 763 skid steer, it's crucial to follow the manufacturer's guidelines, use proper safety measures, ensure the correct replacement parts are used, and properly torque all components during reassembly.
Join hundreds of satisfied customers who have transformed their maintenance processes.
Sign up today and start optimizing your workflow.