How to bypass the seat sensor to restore lift hydraulics when there is no seat or lift light on the panel?
By-passing the seat sensor with jumper wires is not possible, as it operates on a Hall Effect circuit that requires a specific reference voltage input and output. Bobcat used to provide a kit for removing the seat sensor on older C and F series machines. If your seat sliders are still functioning properly, you can either opt for the kit or replace the seat sensor. Ensure there are no obstructions under the seat that could affect sensor engagement.
If you're looking for a seatswitch bypass kit, Bobcat still offers them for purchase. When installing the kit, make sure to properly disconnect the seat switch for optimal functionality.
crewchief888 confirmed that the seatswitch bypass kit is still being offered by Bobcat. It's good to be aware of this, as it is a question that comes up from time to time.
Answer: 1. How can I troubleshoot lift hydraulics on a Bobcat 763 if the seat sensor is not working? - To bypass the seat sensor and restore lift hydraulics, you can use a jumper wire to connect the appropriate wires in the seat sensor harness.
Answer: - In such a situation, you can still bypass the seat sensor by identifying the wires in the seat sensor harness and using a jumper wire to connect them.
Answer: - Bypassing the seat sensor temporarily to troubleshoot lift hydraulics is a common practice. However, it is important to ensure proper safety measures are in place and to address the root cause of the issue once the troubleshooting is complete.
Join hundreds of satisfied customers who have transformed their maintenance processes.
Sign up today and start optimizing your workflow.