Hey there, I'm Pete and this is my first post on this forum. I have a problem with my Gehl CTL80 that has a seized engine. Unfortunately, it's located on a trailer that is too large to fit through the door of my shop. I'm planning to use a mule, which is a hydraulic attachment from my forklift, to help move the Gehl off the trailer. I know it will be a slow process, but I only need to move it a short distance. Can anyone advise me on where to connect the pressure and return to get this 10,000-pound machine to move? Your assistance is greatly appreciated.
Using your forklift to drag heavy machinery can be made easier by placing sand where the tracks will drag or using half sheets of plywood. While powering the hydraulics with the forklift is a feasible idea, the time-consuming process of making lines and adapters may outweigh the benefits. It may be more efficient to simply drag the machinery into place and get to work.
In the past, our method of loading dead skid steers onto trailers involved greasing them up for easier sliding, much like using sand or plywood. To improve the process, consider using car dollies or heavy machinery skates underneath to assist with rolling.
Great suggestions all around! I was considering using a forklift to move it, but my old 2T forklift won't handle the weight of this 5T machine. The customer was working on a project 100 miles south of me when it broke down, and they had to bring in a Cat 950 to load it onto the trailer. The tracks were stuck, so they had to drag it for about 100 yards. I like the idea of using dollies, but my only issue is that I have to unload it on gravel outside my shop, which is owned by the county. I might need to either get my own Cat 950 or find a way to make the machine move itself.
Do you need to remove the axle or gears from the planetary hub to enable free rolling? While I may not be entirely knowledgeable about this particular machine, many models can be accessed and opened externally for maintenance purposes.
I am considering removing the bolts from the sprockets to allow them to "free wheel" on the motor housings, which should help the track turn. However, I have concerns about the "drag it off" method. What if I encounter obstacles halfway through, or struggle to maneuver it through the door? In that case, I would be in a difficult situation. I am seeking a method that enables the equipment to move independently, as it is a safer option. I have reached out to Gehl and several local Gehl dealers for advice on the matter. If I am unable to successfully unload the equipment from the trailer, I will need to outsource the task. This decision will likely need to be made by the end of the day.
Answer: Answer: You can use a forklift mule, a hydraulic attachment, to help move the Gehl off the trailer. Connect the pressure and return lines appropriately to get the machine to move.
Answer: Answer: Ensure you connect the pressure and return lines correctly to the hydraulic attachment on your forklift mule to effectively move the heavy machine.
Answer: Answer: While using a forklift mule to move the Gehl, ensure proper precautions are taken to ensure safety during the process. It's crucial to connect the pressure and return lines correctly to prevent any mishaps.
Join hundreds of satisfied customers who have transformed their maintenance processes.
Sign up today and start optimizing your workflow.