I am facing an issue with my dealer's maintenance of my AC system. According to the service manual, the air coming out of the vents should be much colder than it currently is, and the pressure readings are low. Despite taking it in twice, they keep telling me it's fine but nothing improves. I'm seeking assistance from someone with a Bobcat machine to help me measure the temperature at the vents for comparison. My E50, with just over 100 hours and still under warranty, is only blowing out air at around 60 degrees when it's hot outside. The service manual specifies it should be between 36 and 53 degrees. Thank you for any help you can provide.
In order to optimize efficiency and ensure food safety, BC machines should have the capability to monitor temperature levels and take action if they exceed recommended limits. While obtaining readings from a different machine could provide valuable insights, it should ideally not be a required step.
If your refrigerator is not functioning correctly, remember that you have the freedom to choose any repair service provider. If you notice low pressure, it may be due to freezing. To thaw it quickly, turn on the refrigerator and let it run for a few minutes. Then, turn it off and observe the drain hose for a sudden rush of water.
I am considering taking my vehicle to a different auto repair shop as the closest dealer is 75 miles away and I lack the means to transport it there. I may give the original dealership one more chance, although I had to insist they look at it the last time. The pressure readings are still too low, with the low side measuring around 20psi and the high side at 165 psi when it should be 15-33 psi and 210-265 psi, respectively. Despite bringing it back to the dealership, the readings remained the same.
If your car's tire pressure is low, you can add some air to bring it up to the recommended level. If this solves the issue, great! If not, consider visiting a different dealership for further assistance.
zeroo recommended adding refrigerant to increase the pressure to the correct level. If this doesn't resolve the issue, consider visiting another dealership. Before the first service visit, I added 8 oz. of refrigerant, but saw no change in pressures. The service manual specifies a total of 23 oz. Interestingly, upon return, the dealership claimed the freon levels were correct. Vent temperatures ranged from 53 to 60 degrees during a 3-hour session in 80-degree weather. Water leakage prompted me to remove a rubber nipple from one of the drains. Despite this, low pressures persist at startup.
Answer: - Your Bobcat Mini AC system may be experiencing issues with low pressure readings, leading to warmer air coming out of the vents. It's important to have the system properly diagnosed and serviced to ensure it operates within the specified temperature range.
Answer: - According to the service manual, the air coming out of the vents for a Bobcat E50 machine should be between 36 and 53 degrees. If your machine is blowing air at around 60 degrees, it may indicate a problem with the AC system that needs to be addressed.
Answer: - To accurately measure the temperature at the vents of your Bobcat Mini, you can use a digital thermometer or an infrared temperature gun. Comparing the measured temperature with the specified range in the service manual can help identify any discrepancies and potential issues with the AC system.
Answer: - If your Bobcat E50 AC system is not cooling properly and you have already taken it to the dealer for maintenance without resolution, you may need to escalate the issue
Join hundreds of satisfied customers who have transformed their maintenance processes.
Sign up today and start optimizing your workflow.